Installing Cucumber on Comfast
This guide covers installing Cucumber on the following Comfast APs:
Head into our firmware repository to retrieve a link to the firmware you need.
Comfast firmware is denoted by the "cf". Once you find that, look for the model number of your device.
Then right click and copy the link address.
Connect an Ethernet cable between the LAN port on the router and the network port on your computer
Configure the PC with a static IP, e.g. 192.168.1.2
Press and hold the reset button on the router while you power it on, re-connect the power without releasing the reset button
In your computer's terminal run the following command, making sure to replace the URL with the one you copied previously:
Once that command has run successfully, run the following command, making sure to replace file name and IP with your details:
curl -F firmware=@b_170515_00-cf-(INSERT_CORRECT_MODEL).bin 192.168.1.2